Reactor pu foam spray machine/polyurethane foam spray machine/foam insulation spray machine
CE certification polyurethane foam and polyurea spraying machine can be used for various construction environment with spraying a variety of two-component spray materials and has been widely used in embankment waterproof, pipeline corrosion, auxiliary cofferdam,tanks, pipe coating, cement layer protection, wastewater disposal, roofing, basement waterproofing, industrial maintenance, wear-resistant linings, cold storage insulation, wall insulation and etc.
| Project | CNMC-500L |
| Fixed host configuration | 1 set |
| Self-cleaning spray gun | 1 set |
| Gross weight | 350KG |
| Feed pump | 2 sets |
| Heated hose | 49.2 ft (15 m) |
| Data ratio of raw materials | 1: 1 (fixed) |
| Raw material viscosity range | 200-1000CPS (at working temperature) |
| Max working pressure | 23MPa (230 bar) |
| Maximum Fluid Temperature | 88 ° C (190 ° F) |
| Maximum output | 24 kg / min (50 lb / min) |
| Each heater power | 7500W |
| Heating hose power | 1000W / 15m |
| Total power | 21000W |
| Voltage | 230V 1-ph,230/ 400V 3-ph ,50/60hz |